Install a Receptacle Box and Run the Cable
In a regular installation with nonmetallic (NM) cable, 10-3 NM-B (with ground) cable is run from the primary solution panel up to a recessed socket package. The circuit is usually run with insulated (THHN/THWN) wires inside nonmetallic or EMT conduit if the outlet is https://besthookupwebsites.net/her-review/ surface-mounted, such as on a concrete or block wall. The socket might be a unique surface-mount receptacle or might be a standard dryer receptacle set up in a surface-mounted package.
The way you link the cable or cables in to the package will be determined by the installation. The cable is threaded into the box and secured with a cable clamp with NM cable in finished walls. The conduit is secured to the box with a collar and individual conducting wires are snaked through the conduit and into the box in surface-mounted conduit installations.
Result in the Ground Wire Connection during the Outlet
Link the bare copper (or green insulated) ground cable into the ground screw from the outlet. Note: If the socket is installed in a steel electric field, join the circuit ground cable to two grounding pigtails; link one pigtail into the socket’s ground screw, and link one other to your ground screw from the field.
Link the White Neutral Wire in the Outlet
Remove about 3/4 inches of insulation through the white cable in the cable. Link the white wire that is neutral the silver-colored (basic) terminal regarding the socket. Frequently, the text involves placing the bare cable into the basic slot, then securing it by tightening a screw. In certain designs, you may need certainly to loop the cable around a screw terminal before screwing it straight down.
Connect the Two wires that are hot
Upcoming, strip about 3/4 inches of insulation through the red and black colored hot cables. Pokračování textu Let me make it clear about how precisely to Wire a Dryer